Chapter 5 : Clip Operations; Clip Playback; Thumbnail Screen - Sony HANDYCAM PMW-350K Operating Instructions Manual

5
Chapter

Clip Playback

A thumbnail screen appears if you press the THUMBNAIL button in E-E or playback mode. Thumbnail
screens display lists of the clips stored on S×S memory cards in the form of index pictures. (A message
appears if you insert a memory card that contains no clips.)
You can select any clip (see page 82) in a thumbnail screen and start playback of that clip (see page 82).

Thumbnail Screen

In thumbnail screens, the timecode of the index picture appears beneath the thumbnail for each clip. (An
OK mark also appears when a clip has been marked with an OK mark.)
Note
Normal thumbnail screens display SD clips only or HD clips only, even if the S×S memory card contains clips in both
formats. You can select the format to display by selecting a mode with OPERATION >Format >HD/SD (see page 96) in
the setup menu.
If you want to display all recorded clips, regardless of the HD/SD mode, switch to the all clips thumbnail screen.
However, it is not possible to start playback from the all clips thumbnail screen (see page 85).
HD mode thumbnail screen
Cursor (yellow)
80 Clip Playback
Clip Operations
The icon of the currently selected S×S memory card is highlighted.
(If the card is write protected, a lock appears on the left.)
Clip number/Number of clips