Attaching The Battery Pack; Using The Wall Outlet (Wall Socket) As A Power Source - Sony Handycam NEX-VG10 Operating Manual

Attaching the battery pack

Press the battery pack against the back of the
camcorder, and slide it up until it clicks.
Checking the remaining battery level
Check the level with the following indicators
displayed on the LCD monitor or viewfinder.
Battery level
"Battery exhausted" You cannot record
any more images.
Note
• The displayed level may not be correct under certain
circumstances.
High
Low
Removing the battery pack
Turn off the camcorder. While pressing the BATT
lever (1), remove the battery pack (2).
Using the wall outlet (wall socket)
as a power source
Connect the power cord (mains lead) to the AC
Adaptor, and connect the AC Adaptor to the
camcorder and the wall outlet (wall socket).
Align the v mark on the DC plug with that on the DC
IN jack.
DC IN jack
to the wall outlet
DC plug
(wall socket)
AC Adaptor
Power cord (mains lead)
BATT lever
Continued
19
US