13
Presser stroke movement
.04.06
Rule
The presser foot 3 and the tip of the needle should reach the stitch platen at the same
time when turning the handwheel.
Fig. 13 - 06
● Slide the lever 1 (screw 2) in its slotted lever until you feel it reach the upper stop.
● Lower the presser foot 3 onto the needle plate.
● Loosen the screws 4 until the eccentric 5 is difficult to turn on the shaft.
● Turn the eccentric 5 according to the rule.
● Tighten the screws 4.
3
4
5
2
Adjustment
1
11