General Set; (Other Setup Items) - Sony Handycam HDR-CX12 Handbook

GENERAL SET

(Other setup items)

Touch , then .
If the item is not on the screen, touch
to change the page.
How to set
(HOME) menu  page 59
(OPTION) menu  page 76
The default settings are marked with .
DEMO MODE
The default setting is [ON], allowing you
to view the demonstration in about 10
minutes, after you turn the POWER switch
to (Movie).
 Tips
The demonstration will be suspended in the

following situations.
When you press START/STOP or PHOTO

When you touch the screen during the

demonstration (The demonstration starts
again after about 10 minutes)
When you turn the POWER switch to

(Still)
When you press (HOME) or

IMAGES)
REC LAMP (Recording lamp)
The camera recording lamp on the front
of your camcorder lights up, as the default
setting is [ON].
CALIBRATION
See page 101.
A.SHUT OFF (Auto shut off)
 5min
The camcorder is automatically turned off
when you do not operate your camcorder
for more than approximately 5 minutes.
NEVER
/
The camcorder is not automatically turned
off.

Notes
When you connect your camcorder to a

wall outlet (wall socket), [A.SHUT OFF] is
automatically set to [NEVER].
QUICK ON STBY (Quick on
standby)
You can set the desired turn off time of the
camcorder with [QUICK ON STBY] while
the Sleep mode is set (p. 28). The default
setting is [10min].

Notes
While the Sleep mode is set, the setting of

[A.SHUT OFF] becomes ineffective.
REMOTE CTRL (Remote
control)
The default setting is [ON], allowing you
(VIEW
to use the supplied Remote Commander
(p. 108).
 Tips
Set to [OFF] to prevent your camcorder from

responding to a command sent by another VCR
remote control unit.
CTRL FOR HDMI (Control for
HDMI)
The default setting is [ON], allowing you to
do the playback operation with the remote
commander of your TV by connecting your
camcorder to a "BRAVIA" Sync compatible
TV with the HDMI cable (optional) (p. 41).
5