General Set (Other Setup Items) - Sony DCR-SX83 Operating Manual

GENERAL SET
(Other setup items)
See "Using menus" (p. 51) on the operation.
The default settings are marked with Ô.
SOUND/DISP SET
VOLUME
You can adjust the volume of playback
sound by touching
BEEP
Ô ON
A melody sounds when you start/stop
recording, or operate the touch panel.
OFF
Cancels the melody.
LCD BRIGHT
You can adjust the brightness of the LCD
screen by touching
Tips
¼
This adjustment does not affect the recorded
images in any way.
LCD BL LEVEL (LCD backlight level)
You can select the brightness of the LCD
screen's backlight.
Ô NORMAL
Standard brightness.
BRIGHT
Brightens the LCD screen.
¦
Notes
When you connect your camcorder to the wall
outlet (wall socket) using the supplied AC
Adaptor, [BRIGHT] is automatically selected
for the setting.
When you select [BRIGHT], battery life is
slightly reduced during recording.
US
68
/ .
/ .
If you open the LCD panel 180 degrees to face
the screen outside and close the LCD panel
to the camcorder body, the setting becomes
[NORMAL] automatically.
¼ Tips
This adjustment does not affect the recorded
images in any way.
LCD COLOR
You can adjust the color of the LCD screen
by touching /
¼ Tips
This adjustment does not affect the recorded
images in any way.
DISPLAY SET
You can set the duration of displaying the
icons or indicators on the LCD screen.
Ô AUTO1
Displays for about 3 seconds. The rec & zoom
buttons on the LCD is displayed.
AUTO2
Displays for about 3 seconds. The rec & zoom
buttons on the LCD is not displayed.
ON
Always displays. The rec & zoom buttons on
the LCD is not displayed.
Tips
¼
The icons or indicators are displayed in the
following cases.
When you turn on your camcorder.
The LCD screen is touched (Except rec &
zoom buttons on LCD).
When you switch your camcorder to the
movie recording, photo recording, or
playback modes.
.