Table of Contents
Advertisement
MANAGE MEDIA
(Items for recording media)
See "Using menus" (p. 53) on the operation.
MEDIA INFO
You can check the remaining recordable
time for each recording mode of the
recording media for movies and the
approximate free and used media space of
the recording media.
To turn off the display
Select
.
Notes
Since there is a management file area, the
used space is not displayed as 0 % even if you
perform [MEDIA FORMAT] (p. 66).
MEDIA FORMAT
Formatting deletes all the movies and
photos to recover recordable free space.
Select [YES] [YES]
Notes
Connect your camcorder to the wall outlet (wall
socket) using AC Adaptor supplied for this
operation (p. 13).
To avoid the loss of important images, you
should save them before formatting the
recording media.
Protected movies and photos will also be
deleted.
While [Executing...] is displayed, do not close
the LCD screen, operate the buttons on the
camcorder, disconnect the AC Adaptor, or eject
the memory card from your camcorder (The
access lamp is lit or flashing while formatting
memory card.).
REPAIR IMG.DB F.
See page 72, 74.
(Other setup items)
See "Using menus" (p. 53) on the operation.
The default settings are marked with .
SOUND/DISP SET
VOLUME
You can adjust the volume of playback
sound by selecting
BEEP
ON
LCD BRIGHT
You can adjust the brightness of the LCD
screen by selecting
.
Tips
This adjustment does not affect the recorded
images in any way.
LCD BL LEVEL (LCD backlight level)
You can select the brightness of the LCD
screen's backlight.
NORMAL
Notes
When you connect your camcorder to the wall
outlet (wall socket) using the supplied AC
Adaptor, [BRIGHT] is automatically selected
for the setting.
When you select [BRIGHT], battery life is
slightly reduced during recording.
US
GENERAL SET
/
A melody sounds when you start/stop
recording, or press the center of the multi-
selector to confirm.
OFF
Cancels the melody.
/
Standard brightness.
BRIGHT
Brightens the LCD screen.
.
.
Advertisement
Table of Contents
