Dubbing To Other Devices - Sony Handycam HDR-CX12 Handbook

Dubbing to other devices

Connecting with the A/V connecting cable
You can dub images played back on your camcorder to other recording devices, such as
VCRs or DVD/HDD recorders. Connect the device in either of the following ways.
Connect your camcorder to the wall outlet (wall socket) using the supplied AC Adaptor for
this operation (p. 15). Refer also to the instruction manuals supplied with the devices to be
connected.
Set the image quality of the movie you want to dub beforehand (p. 56).

Notes
Movies recorded with HD (high definition) image quality will be dubbed with SD (standard

definition) image quality.
To copy movies recorded with HD (high definition) image quality, install the application software

(supplied) on your computer, and copy the images to a disc in the computer.
Since dubbing is performed via analog data transfer, the image quality may deteriorate.

A/V OUT jack
: Video/Signal flow
 A/V connecting cable (supplied)
Your camcorder and the Handycam
Station are equipped with A/V
Remote Connector or A/V OUT
jack (p. 106,107). Connect the
A/V connecting cable either to
the Handycam Station or to your
camcorder, depending on your setup.
Device without an
S VIDEO jack
(Yellow)
(White)
(Red)
 A/V connecting cable with S VIDEO
(optional)
When connecting to another device
via the S VIDEO jack, by using an A/V
connecting cable with an S VIDEO
cable (optional), higher quality images
can be produced than with an A/V
connecting cable. Connect the white
and red plugs (left/right audio) and
Device with an S
VIDEO jack
(White)
(Red)
(Yellow)
VCRs or DVD/HDD
recorders
51