Siemens SIMATIC NET SCALANCE X-300M Compact Operating Instructions page 26

Assembling
4.3 General installation
Removing
To remove an IE Switch X-300 from the DIN rail:
1. Disconnect all cables from the switch.
2. Release the lower part of the IE Switch X-300 from the DIN rail with a screwdriver and
pull the lower part of the switch away from the DIN rail.
Figure 4-2
Removing an IE Switch X-300
1. Push the X-300 down.
2. Swing the device upwards.
No tools are necessary for removing the device.
26
Removing an IE Switch X-300 from a DIN rail (35 mm)
Compact Operating Instructions, 10/2014, A5E02630801-06
SCALANCE X-300M