Vertex Standard FT-857 Operating Manual page 74

Available Values: ARTS/BAND/FIX/MEMGRP/MODE/MTR/VFO
Default: FIX
MENU MODE No-042 [DISP CONTRAST]
Function: Setting of the display contrast level.
Available Values: 1 ~ 13
Default: 5
MENU MODE No-043 [DISP INTENSITY]
Function: Setting of the display brightness level.
Available Values: 0 (Dim) ~ 3 (Bright)
Default: 3
MENU MODE No 044 [DISP MODE]
Function: Sets up the LCD Lamp mode.
Available Values: OFF/AUTO1/AUTO2/ON
Default: AUTO2
OFF: Disables the LCD illumination.
AUTO1: Illuminates the LCD for three seconds when any button is pressed, or if you rotate the MEM/VFO CH knob.
AUTO2: Illuminates the LCD continuously while the FT-857 is operating on an external power supply. When using the
FNB-78 internal battery in the AUTO2 mode, the LCD will light up for three seconds when any button is
pressed, or if you rotate the MEM/VFO CH knob (identical to AUTO1 mode).
ON: Illuminates the LCD continuously.
MENU MODE No-045 [DSP BPF WIDTH]
Function: Setting of the bandwidth for the DSP CW audio filter.
Available Values: 60/120/240 Hz
Default: 240
MENU MODE No-046 [DSP HPF CUTOFF]
Function: Adjusts the low-cut characteristics of the DSP HPF filter.
Available Values: 100/160/220/280/340/400/460/520/580/640/700/760/820/880/940/1000 (Hz)
Default: 100
74
FCC ID: K66FT-857
Operating Manual
Vertex Standard Co., Ltd.