Assigning Names For Et 200 - Siemens SIMATIC S7-1500 Getting Started

3.1.9

Assigning names for ET 200

Introduction
In the following section, you will assign project-specific names to the distributed I/O.
Procedure
1. Select ET 200SP.
2. Under Properties > General in the inspector window, enter the name
3. Select ET 200MP and enter the new name "Mixer_Conveyor_Control_Unit".
Result
You have assigned the project-specific names.
S7-1500
Getting Started, 05/2014, A5E03981761-AC
"Valve_Control_Unit" in the "Name" field.
Software section
3.1 Creating the project and hardware
47