Insulation Package - A.O. Smith STE-1000 Installation, User And Service Manual

3.7 Isolation package
3.7.1
Installation, User and Service Manual STE
The insulation package of this water heater has two different versions. An insulation
package with hard aluminum jacket (M0-jacket) and an insulation package with soft
jacket (M1- jacket)
Hard jacket
Mount the separate delivered isolation package.
1. Unpack the insulation package and place the parts near the water heater.
2. Mount the 4 parts, for the cover, together with the screw that are in the 4 parts.
3. Position the parts, with the two halve circels, behind the control unit. Mount the
together with the hooks. Remove the protective platsic after these parts are
mountened.
77