Turning on the Power
1
Turn on the POWER switch at the rear of
the main unit.
The POWER lamp lights up.
As long as the POWER switch on the main
unit is set to ON, you can turn on or off the
camera with the POWER switch on the
remote commander.
When the power is turned on, the camera will
automatically face toward the lower right-
hand side and then the front, which is the
home position of the camera. (Pan/tilt reset
action)
2
Turn on the peripheral devices.
Installing batteries
EN
8
Setting the Clock
Use the buttons on the main unit to set the clock.
1
Light up.
2
3
R6 (size AA) x 2
(not supplied)
Press the DATE and TIME buttons at the
same time and hold them down for about
2 seconds. Release your hand as the
month and date appear and the year starts
flashing.
EVI-D30
JAN 1
1996
EVI-D31
1
1
1996
Repeat pressing the DATE button to
select the year.
Press the TIME button to set the year.
EVI-D30
JAN 1
1996
EVI-D31
1
1
1996
DATE
TIME
DATE
TIME