Advanced Operations; Using Alternative Power Sources - Sony DSR-200 Operating Instructions Manual

Advanced operations

Using alternative power sources

You can choose any of the following power sources for your digital camcorder: battery
pack and the house current. Choose the appropriate power source depending on where
you want to use your digital camcorder.
Place
Indoors
Outdoors
Note on AC power adaptor
Use the recommended AC power adaptor, such as AC-V615.
Note on power sources
Disconnecting the power source or removing the battery pack during recording or
playback may damage the inserted tape. If this happens, restore the power supply
again immediately.
Using the house current
(1) Connect the power cord to the AC power adaptor.
(2) Connect the power cord to a wall outlet, then connect the connecting cord (not
supplied) to the DC OUT jack on the AC power adaptor.
(3) Connect the connecting cord to the DC IN jack on the digital camcorder.
1
38
Power source Accessory to be used (not supplied)
House current AC power adaptor AC-V615
Battery pack Battery pack NP-F930, NP-F730, NP-720
Battery adaptor NPA-10000
2
DC OUT
3
DC IN
DSR-200 U/C 3-858-622-22(1). E