Self-Diagnosis Display - Sony Handycam DCR-TRV510E Operating Instructions Manual

English

Self-diagnosis display

Your camcorder has a self-diagnosis display
function.
This function displays the current condition of
your camcorder as a 5-digit code (a combination of
a letter and figures) in the viewfinder, on the LCD
screen or in the display window. If a 5-digit code is
displayed, check the following code chart. The last
two digits (indicated by ππ) will differ depending
on the state of your camcorder.
Five-digit display
C:04:ππ
C:21:ππ
C:22:ππ
C:31:ππ
C:32:ππ
E:61:ππ
E:62:ππ
If you are unable to rectify the problem even if you try corrective actions a few times, contact your
Sony dealer or local authorized Sony service facility.
122
Cause and/or Corrective Actions
• You are using a battery pack that is not an "InfoLITHIUM"
battery pack.
m Use an "InfoLITHIUM" battery pack. (p. 17)
• Moisture condensation has occurred.
m Remove the cassette and leave your camcorder for at least 1
hour to acclimatize. (p. 131)
• The video heads are dirty.
m Clean the heads using the Sony V8-25CLD cleaning cassette
(not supplied). (p. 132)
• A malfunction other than the above that you can service has
occurred.
m Remove the cassette and insert it again, then operate your
camcorder.
m Disconnect the mains lead of the AC power adaptor or
remove the battery pack. After reconnecting the power
source, operate your camcorder.
• A malfunction that you cannot service has occurred.
m Contact your Sony dealer or local authorized Sony service
facility and inform them of the 5-digit code. (example:
E:61:10)
Viewfinder (or LCD screen)
C:21:00
Self-diagnosis display
•C:ππ:ππ
You can service your camcorder
yourself.
•E:ππ:ππ
Contact your Sony dealer or local
authorized Sony facility.