Procedure Overview; Registering The Repeater - Panasonic WX-CR470 Operating Instructions Manual

2 Procedure Overview

When registering and installing the repeater, follow the procedure below to ensure
smooth operation.

Registering the Repeater

IMPORTANT
Register the repeater to 1 CM only. You cannot register to multiple CMs.
1. Plug in the repeater's AC adaptor into an outlet near the CM.
• After plugging in, the STATUS LED will turn green.
*1
The cable is already connected when purchased.
2. Set up the CM for registration.
• Refer to the documentation for the CM.
3. Within 2 minutes of setting up the CM for registration, press and hold down the
repeater's PROGRAM button for approximately 3 seconds.
RSSI/ID LED
After flashing green,
Unit will reboot.
PROGRAM Button
2 Procedure Overview
13
1