Searching for a photo – PHOTO SEARCH/PHOTO SCAN
Scanning photo
(1) Set the POWER switch to VCR.
(2) Press SEARCH MODE on the Remote Commander repeatedly until the
PHOTO SCAN indicator appears on the screen.
The indicator changes as follows:
DATE SEARCH t PHOTO SEARCH t PHOTO SCAN t (no indicator)
(3) Press . or >.
Each photo is played back for about five seconds automatically.
2
SEARCH
MODE
3
To stop scanning
Press x.
If a tape has a blank portion between recorded portions
The photo search and photo scan function may not work correctly.
PHOTO
00
SCAN
DCR-TRV250
93