Recording/Playback
Recording
Lens cover
Opens in accordance
with the setting of the
POWER switch.
START/STOP B
1
Slide the POWER switch in the
direction of the arrow repeatedly to
light up the respective lamp.
2
Start recording.
Movies
Press START/STOP A (or B).
START/
STOP
To stop recording, press START/STOP
again.
• If the ACCESS lamp is on after recording is finished, it means data is still being written onto the hard disk.
Do not apply shock or vibration to your camcorder, and do not remove the battery pack or AC Adaptor.
• You cannot record movies and still images at the same time.
• A recordable time of movies in a succession is up to 12 hours.
• When a movie data file exceeds 2 GB, the next file is created automatically.
• For image quality of movies, see [REC MODE] (p.59), of still images, see [
28
00:01:00
REC
60min
P-MENU
[STBY] b [REC]
Zoom lever
Still Images
Press PHOTO lightly to adjust the
focus A, then press it fully B.
Beep
A shutter sound is heard. When
disappears, the image has been recorded.
PHOTO
POWER switch
START/STOP A
ACCESS lamp
Press the green button
only when the POWER
switch is in the OFF
(CHG) position.
Shutter
123
60min
FINE
3.0M
P-MENU
Flashing b Lights up
IMAGE SIZE] (p.55).
click