Recording/Playback; Recording - Sony HANDYCAM HDR-SR7E Operating Manual

Recording/Playback

Recording

POWER switch C
START/STOP A
(HOME) B
(p. 19)
1
Slide the POWER switch C until the respective lamp lights up.
Press the green button only when the POWER switch C is in the OFF (CHG) position.
• (Movie): To record movies
• (Still): To record still images
2
Start recording.
Movies
Press START/STOP A (or D).
To stop recording, press START/STOP A
(or D) again.
• You cannot record movies on a "Memory Stick
Duo."
• See "Handycam Handbook" (PDF) for changing
the image quality to SD (standard definition)
image quality.
b Notes
• If the ACCESS lamp is lit or flashing after recording is finished, it means data is still being written onto
the hard disk or "Memory Stick Duo." Do not apply shock or vibration to your camcorder, and do not
remove the battery or AC Adaptor.
10
EASY F
START/STOP D
PHOTO
E
Flashing t Lights up
Still Images
Press PHOTO E lightly to adjust the
focus A (a beep sounds), then press
it fully B (a shutter click sounds).
appears beside
disappears, the image has been recorded.
• Still images are recorded on the hard disk in the
default setting.
[STBY] t [REC]
/ . When