Sony Handycam DCR-SR90E Operating Manual page 82

Troubleshooting (continued)
Playback
" " is indicated on an image in the VISUAL INDEX screen.
• Loading of the data may have failed. It may be indicated correctly when you turn off the power
and then turn it on again.
• You removed the AC Adaptor or the battery pack before the ACCESS lamp is turned on after
recording. This may damage your image data and
" " is indicated on an image in the VISUAL INDEX screen.
• The image data is damaged. Delete the image marked with
No sound or only a low sound is heard when playing back.
• Set [MULTI-SOUND] to [STEREO] (p.59).
• Turn up the volume (p.29).
• Sound is not output when the LCD screen is closed. Open the LCD screen.
• When you record sound with [MICREF LEVEL] (p.59) set to [LOW], the recorded sound may
be difficult to hear.
Image data
Images cannot be deleted.
• Protected images cannot be deleted. Cancel the image protection (p.68).
The data file name is not indicated correctly.
• Only the file name is displayed if the directory structure does not conform to the camcorder
standard.
• The file is damaged.
• The file format is not supported on your camcorder (p.92).
The data file name flashes.
• The file is damaged.
• The file format is not supported on your camcorder (p.92).
Setup items
Setup items are grayed out.
• You cannot select grayed items in the current situation.
is not displayed.
• You can operate limited operations during Easy Handycam operation. Cancel Easy Handycam
operation (p.25).
82
is displayed.
(p.43).