Remote Commander - Sony Handycam DCR-SR90E Operating Manual

Remote Commander

Remove the insulation sheet before using the
Remote Commander.
Insulation sheet
1 DATA CODE (p.60)
Displays the date and time or camera setting
data of the recorded images (p.60) when you
press this while playing back.
2 PHOTO (p.25, 28)
The on-screen image when you press this
button will be recorded as a still image.
3 SCAN/SLOW (p.27, 29)
4 . > (Previous/Next) (p.27, 29)
5 PLAY (p.27, 29)
6 STOP (p.27, 29)
7 DISPLAY (p.19)
8 Transmitter
9 START/STOP (p.24, 28)
q; Power zoom (p.32, 34)
qa PAUSE (p.27, 29)
qs VISUAL INDEX (p.26, 29)
Displays a VISUAL INDEX screen when you
press this while playing back.
qd b / B / v / V / ENTER
When you press any button, the orange frame
appears on the LCD screen. Select a desired
button or an item with b / B / v / V, then press
ENTER to enter.
• Point the Remote Commander towards the remote
sensor to operate your camcorder (p.35).
• When no commands have been sent from the
Remote Commander in a certain period, the
orange frame disappears. When you press any of
b / B / v / V, or ENTER again, the frame appears
at the position where it was displayed last.
• To change the battery, see page 96.
39