Recording a picture
1
Remove the lens cap.
2
When the
LCD panel
is closed,
pull out the
viewfinder
until it
clicks. Use
the
viewfinder
placing
your eye
against its
eyecup.
Monitoring the playback picture on the LCD
screen
(p. 27)
1
Set the POWER switch to VCR while
pressing the small green button.
POWER
2
Press OPEN
to open the
LCD panel.
NOTE
Do not pick up your
camcorder by holding the
viewfinder, the LCD panel,
the battery pack or the jack
cover.
(p. 18)
LOCK
3
Set the POWER switch to CAMERA
while pressing the small green
button. The power lamp lights up.
POWER
4
Press START/STOP. Your camcorder
starts recording. To stop recording,
press START/STOP again.
POWER
3
Press
of the touch panel to
rewind the tape.
4
Press
of the touch panel to
start playback.
NOTE
When using the touch panel, press
operation buttons lightly with your
thumb supporting the LCD screen from
the backside of it. Do not press the LCD
screen with sharp-pointed objects such
as pens.
LOCK
LOCK
7