Sony Handycam DCR-PC5 Operating Instructions Manual page 38

Using the fader function
(1) When fading in [a]
(2) Press FADER. The screen to select the fader mode appears.
(3) Select a desired fader mode.
(4) Press
(5) Press START/STOP. After the fade in/out is carried out, your camcorder
1
2~4
To cancel the fader function
After the fade in/out is carried out : Your camcorder automatically returns to the
normal mode.
Before the fade in/out is carried out : Before pressing START/STOP, press
return to PAGE1, and press EXIT to return to FN.
Note
You cannot use the following functions while using the fader function. Also, you cannot
use the fader function while using the following functions.
– Digital effect
– Low lux mode of PROGRAM AE (Overlap, Wipe or Dot function only)
– Super NightShot
– Tape Photo recording
38
In the standby mode, press FN to display PAGE1 (p. 16).
When fading out [b]
In the recording mode, press FN to display PAGE1 (p. 16).
OK to return to PAGE1, and press EXIT to return to FN.
The fader indicator you selected flashes.
automatically returns to the normal mode.
FN
FADER
FADER
OFF OK
MOSC.
NORM. BOUN–
FADER
FADER CE
MONO– OVER– W I PE DOT
TONE LAP
OFF to