Sony Handycam DCR-PC350E Operation Manual page 120

Symptom
The title cannot be deleted.
The Title search does not work.
Still pictures cannot be dubbed from a
tape to a "Memory Stick Duo."
Movies cannot be dubbed from a tape
to a "Memory Stick Duo."
Digital program editing on the tape
does not function.
The VCR is not responding properly
during Digital program editing when
it is connected via an i.LINK cable.
Digital program editing on the
"Memory Stick Duo" does not
function correctly.
The picture appears distorted or dark. • A/V connecting cables (supplied) or S video cables (optional) are
120
Troubleshooting
Cause and/or Corrective Actions
cSet the write-protect tab to REC. (p. 127)
cEnter a title if there is no title on the tape. (p. 81)
cUse a cassette with Cassette Memory. (p. 126)
cSet [
SEARCH] to [ON] in the
• There is a blank section in the beginning or middle of the tape. This is
not a malfunction.
• You cannot record or a distorted picture may be recorded if the tape has
been used repeatedly for recording.
• You cannot record or a distorted picture may be recorded in the
following:
– The tape has a blank section.
– The tape has been used repeatedly for recording.
– Input signal has been interrupted or cut.
cSet the input selector on the VCR correctly, then check the connection
between your camcorder and the VCR. (p. 93)
cWhen your camcorder is connected to a DV device that is not a Sony
product via an i.LINK cable, select [IR] in step11 of "Step 1: Preparing
your camcorder and VCR for operation" (p. 98).
cAdjust the synchronization of the VCR. (p. 101)
cEnter a correct [IR SETUP] code. (p. 101)
cSelect the mode used to cancel recording pause again. (p. 100)
cSet your camcorder and the VCR more than 30 cm (12 in.) apart. (p. 100)
• The program cannot be set to a blank section on the tape.
• You cannot perform the Digital program editing on a VCR that does not
support [IR SETUP] codes, a DVD recorder and a DVD recorder
equipped with an HDD, etc.
cWhile connecting via an i.LINK cable, select [IR] in step 11 of "Step 1:
Preparing your camcorder and VCR for operation" (p. 98).
• You cannot perform the Digital program editing on a DVD recorder, a
DVD recorder equipped with an HDD, etc.
• The program cannot be set to a blank section on the tape.
• You cannot record or a distorted picture may be recorded if the tape has
been used repeatedly for recording.
connected to both your camcorder and the Handycam Station.
cDisconnect one of the A/V connecting cables or S video cables.
(EDIT/PLAY) menu. (p. 81)