Recording An Image From A Mini Dv Tape As A Still Image - Sony Handycam DCR-PC3 Operating Instructions Manual

Recording an image from a mini DV tape
as a still image
Your camcorder can read moving picture data recorded on a mini DV tape and record it
as a still image on a "Memory Stick". Your camcorder can also take in moving picture
data through the input connector and record it as a still image on a "Memory Stick".
Before operation
Insert a recorded mini DV tape and a "Memory Stick" into your camcorder.
(1) Set the POWER switch to VTR.
(2) Press
(3) Keep pressing PHOTO lightly until the picture from the mini DV tape freezes.
(4) Press PHOTO deeper. The image displayed on the screen will be recorded on a
2
When the ACCESS lamp is lit or flashing
Never shake or strike the unit. As well do not turn the power off , eject a "Memory
Stick" or remove the battery pack. Otherwise, the image data breakdown may occur.
If "
The inserted "Memory Stick" is incompartible with your camcorder because its format
does not comform with your camcorder. Check the format of the "Memory Stick".
If you press PHOTO lightly in the playback mode
Your camcorder stops momentarily.
Sound recorded on a mini DV tape
You cannot record the audio from a mini DV tape.
Titles have already recorded on mini DV tapes
You cannot record the titles on "Memory Stick"s. The title does not appear while you
are recording a still picture with PHOTO.
When you press the PHOTO button on the Remote Commander
Your camcorder immediately records the image that is on the screen when you press
the button.
96
. The picture recorded on the mini DV tape is played back.
"CAPTURE" appears on the LCD screen or in the viewfinder. Recording does
not start yet.
"Memory Stick". Recording is complete when the bar scroll indicator
disappears.
3
PHOTO
" appears on the LCD screen or in the viewfinder
1 / 40
CAPTURE
x m N X M FN
4
PHOTO
x m
1
POWER
OFF
N X M FN