VIDEO INPUT
USB-CAMERA
USB-PLY/EDT
DATA CODE
REMAINING
68
Using the Menu
When you connect your camcorder to the other device using the supplied A/V
connecting cable, select the plug to be used for video input.
GVIDEO
Select to input a video signal.
S VIDEO
Select to input an S video signals.
You can connect a USB cable (supplied) to your camcorder, and view the picture
displayed on the screen of your camcorder on your computer (USB Streaming
function). For details, refer to the "Computer Applications Guide."
GOFF
Select to deactivate the USB Streaming function.
USB STREAM
Select to activate the USB Streaming function.
You can connect a USB cable (supplied) to your camcorder, and view the picture
on the tape or "Memory Stick Duo" in your camcorder on your computer. For
details, refer to the "Computer Applications Guide."
GSTD-USB
Select to view the picture on the "Memory Stick Duo".
USB STREAM
Select to view the picture on the tape.
GOFF
Select when you do not want to display date, time and the camera
settings data during playback.
DATE/TIME
Select to display date and time during playback (p. 43).
CAMERA DATA
Select to display the camera settings data during playback.
GAUTO
Select to display the remaining tape indicator for about 8 seconds:
– After the POWER switch is set to the PLAY/EDIT or
CAMERA-TAPE mode with the cassette inserted, and
your camcorder calculates the remaining amount of tape.
– When you touch
ON
Select to always display the remaining tape indicator.
(play/pause).