Remote Ctrl - Sony Handycam DCR-IP1 Operation Manual

REMOTE CTRL

GON
OFF
Note
b
• The setting returns to [ON] when you disconnect the power source from your camcorder
for more than 5 minutes.
REC LED
GON
OFF
INFO DISP
INFO DISP
RECORDED AREA
GON
OFF
BEEP
GMELODY
Select when using the Remote Commander supplied with your
camcorder
Select to deactivate the Remote Commander to prevent your
camcorder from responding to a command sent by another VCR
remote control unit.
Select to turn on the camera recording lamp on the front of your
camcorder during recording
Select this setting in the following recording situations. The camera
recording lamp will not light up during recording.
– When you do not want the subject to be nervous about
being recorded.
– When you are recording close to the subject.
– When the subject reflects the recording lamp.
The unique number of each cassette. Your camcorder
automatically assign this number. You can not change this
number.
ID 00002
The cassette title set by [
GRADUATION
(Cassette label).
JAN 01 2004 10:00
AM
The first-recorded date in this cassette.
JAN 15 2004 03:00
PM
The last-recorded date in this cassette.
The recorded area is indicated by the yellow-green bar.
Select to display the cassette information for about 5 seconds:
– After the POWER switch is set to the CAMERA-TAPE
mode and the cassette is inserted.
– When the POWER switch is set to the PLAY/EDIT mode.
Select when you do not want to display the cassette information.
Select to sound a melody when you start/stop recording, when
executing any operation on the touch panel or when an unusual
condition occurs on your camcorder.
TAPE TITLE] in the menu settings
,continued
Using the Menu
69