Using Special Effects - Digital Effect - Sony Handycam DCR-IP1 Operation Manual

MENU, then select it from the
APPLI.) menu.
STBY 0:00:00
60min
FADER: OFF
NORMAL
OFF
FADER
MOSAIC MONO-
FADER TONE
4
Touch the desired effect, then touch
.
60min STBY 0:00:00
NORMAL
FADER
P-MENU
5
Press START/STOP.
The fader indicator stops flashing and stays
lit up, then disappears when the fade is
complete.
To cancel the FADER
Follow steps 2 and 3, then touch [OFF] in step 4.
b Note
• You cannot use FADER together with:
– Color Slow Shutter
– Digital effect
z Tip
• You can also select the fade-in effect while
recording. When you stop the recording, the screen
turns blue to store its last image, from which you can
fade into the continuing recording.
Fading in from a still image on the
"Memory Stick Duo" — Memory
overlap
You can fade in from the still image on the
"Memory Stick Duo" to the movie currently
being recorded on the tape.
Still image
1
(PICT.
2
3
4
5
6
7
8
9
Using special effects
— Digital effect
You can add digital effects to the recordings.
[STILL] (still)
You can record a movie superimposing it on a
previously recorded still image.
[FLASH] (flash motion)
You can record a movie with a serial-still-image
effect (Strobe effect).
Movie
[LUMI.KEY] (luminance key)
You can replace a brighter area in a previously
recorded still image, such as the background of
Check that you have a "Memory Stick
Duo" with the still image to be
superimposed and a tape in your
camcorder.
Slide the POWER switch to select the
CAMERA-TAPE mode.
Touch .
Touch MENU.
Select the (PICT.APPLI.) menu,
then [ OVERLAP] using
then touch .
The recorded still image on the "Memory
Stick Duo" appears on the thumbnail
screen.
Touch (previous) /
select the still image to be superimposed.
Touch [ON], then
Touch .
Press START/STOP to start recording.
The [M.OVRLAP] indicator stops flashing
and stays lit up, then disappears when fade
is completed.
/ ,
(next) to
.
,continued
33
Recording