Step 2: Charging The Battery Pack - Sony Handycam DCR-HC30E Operation Manual

Step 2: Charging the
battery pack
You can charge the battery by attaching the
"InfoLITHIUM" battery pack (P series) to
your camcorder.
b Notes
• You cannot use batteries other than the
"InfoLITHIUM" battery pack (P series) (p. 128).
• Do not short-circuit the DC plug of the AC Adaptor
or battery terminals with any metallic objects. This
may cause a malfunction.
• Use a nearby wall socket when using the AC
Adaptor. Disconnect the AC Adaptor from the wall
socket immediately if any malfunction occurs.
Battery pack
DC IN jack
Mains lead
To the wall socket
16
Getting started
DC plug
AC Adaptor
1
Attach the battery pack by sliding it in
the direction of the arrow until it
clicks.
2
With the v mark on the DC plug facing
down, connect the AC Adaptor to the
DC IN jack on your camcorder.
3
Connect the mains lead to the AC
Adaptor.
4
Connect the mains lead to the wall
socket.
5
Slide the POWER switch up to OFF
(CHG).
v mark