Power Consumption For The Nytro Xp6302 Card; Thermal Considerations; Maximum Sensor Temperature - Seagate Nytro XP6302 Series User Manual

www.seagate.com
If you experience a problem with your Nytro XP6302 card that you cannot resolve, report it to your FAE or, if you
obtained the product from an OEM, report it to the OEM. Keep these tips in mind when reporting a problem:
Clearly identify and report the revision level of the Nytro XP6302 card. To view this information, use the

management utility List command.
Report the part number listed on the label, and clearly identify the board revision.

Describe the steps leading up to the error.

Report the operating system version and the host driver version.

3.1.3

Power Consumption for the Nytro XP6302 Card

The Nytro XP6302 card receives power from the PCIe 12-V power rail.
Use the following data for power consumption.
Table 3 Power Consumption
Model Name
XP6302-8B4096
XP6302-8B2048
XP6302-8B1536
3.1.4

Thermal Considerations

The board is designed to operate in an environment defined by the following parameters:
Temperature range:

Relative humidity range:

Maximum wet bulb temperature:

Minimum airflow:

Relative humidity range:

Operating altitude:

De-rate:

The board is designed for the following storage and transit environmental parameters:
Temperature range:

Relative humidity range:

3.1.4.1

Maximum Sensor Temperature

System design and cooling capacity variations can affect the actual airflow delivered to the Nytro XP6302 cards.
System-level fan speeds might require adjustment to make sure that the Nytro XP6302 sensor temperature does not
exceed the maximums. The maximum sensor temperature for the Nytro XP6302 cards is 76 °C.
Seagate Nytro XP6302 Flash Accelerator Cards User Guide, Rev. E
Card Capacity Idle
4 TB 22.7 W
2 TB 21.1 W
1.5 TB 21.1 W
NOTE For the 2 TB and the 1.5 TB cards, typical power I/O was measured at
8-KB, random access, 30% write, 70% read, Queue Depth
(QD)=32/SSD. Maximum power I/O was measured at 4-KB, random
access, 70% write, 30% read, QD=32/SSD.
NOTE For the 4 TB card, typical power I/O was measured at 8-KB, random
access, 30% write, 70% read, Queue Depth (QD)=32/SSD. Maximum
power I/O was measured at 16-KB, sequential 100% write, QD=32/SSD.
Typical Power I/O
37.2 W
36.2 W
36.2 W
5 °C to 45 °C
5% to 90% non-condensing
28 °C
300 LFM
20% to 80% non-condensing
3000 m
2 °C per 1000 m above 1000 m
–25 °C to 70 °C
5% to 95% non-condensing
Nytro XP6302 Card Characteristics
Maximum Power I/O
38.9 W
37.2 W
37.2 W
15