Step 2: Charging The Battery Pack - Sony Handycam DCR-HC21 Operating Manual

Step 2: Charging the battery pack

You can charge the "InfoLITHIUM"
battery pack (P series) (p. 79) after
attaching it to your camcorder.
DC IN jack
To the wall outlet
1
Attach the battery pack by sliding
it in the direction of the arrow
until it clicks.
2
Slide the POWER switch up to
OFF (CHG). (The default setting.)
3
Connect the AC Adaptor to the
DC IN jack on your camcorder.
10
POWER switch
DC plug
AC Adaptor
4
Connect the power cord to the AC
Adaptor and the wall outlet.
CHG (charge) lamp
The CHG (charge) lamp lights up and
charging starts.
5
The CHG (charge) lamp turns off
when the battery is fully charged.
Disconnect the AC Adaptor from
the DC IN jack.
To remove the battery pack
Turn off the power, then press PUSH button
and remove the battery pack.
DC IN jack
With the  mark
facing down