Searching For The Starting Point; Searching Manually (Edit Search); Reviewing The Most Recently Recorded Scenes (Rec Review) - Sony Handycam DCR-HC21 Operating Manual

Searching for the starting point

Make sure that the CAMERA lamp lights
up.
Searching for the last scene of the
most recent recording (END SEARCH)
[END SCH] (END SEARCH) will not
work once you eject the cassette after you
have recorded on the tape.
 [PAGE1], then touch
Touch
[END SCH].
60min
PAGE1 PAGE2
SPOT FOCUS
FOCUS METER
MENU FADER END
SCH
Touch here again to cancel the operation.
The last scene of the most recent
recording is played back for about 5
seconds, and the camcorder enters the
standby mode at the point where the last
recording has finished.
• [END SCH] will not work correctly when
there is a blank section between recorded
sections on the tape.
• When the PLAY/EDIT lamp lights up, you
can do this operation.
Searching manually (EDIT
SEARCH)
You can search for the start point to start
the next recording while viewing the
pictures on the screen. The sound is not
played back during the search.
1
Touch
[MENU].
26
0:00:00
SPOT DISP
GUIDE
EXPO–
SURE
 [PAGE1] 
2
Select (CAMERA SET) with
/ , then touch [EXEC].
3
Select [EDITSEARCH] with
/ , then touch [EXEC].
4
Select [ON] with
touch [EXEC] 
60min
EDIT
5
Touch and hold
backward)/
and release it at the point where
you want the recording to start.
Reviewing the most recently
recorded scenes (Rec review)
You can view a few seconds of the scene
recorded just before you stopped the tape.
1
 [PAGE1] 
Touch
[MENU].
2
Select (CAMERA SET) with
/ , then touch [EXEC].
3
Select [EDITSEARCH] with
/ , then touch [EXEC].
4
Select [ON] with
/ , then
.
STBY 0:00:00
FN
(to go
(to go forward)
/ , then