Table 14: Default Access Egress Policy Id 1 Definition - Alcatel-Lucent 7210 SAS E OS Quality Of Service Manual

Table 14: Default Access Egress Policy ID 1 Definition

Characteristic
Queues
Network-Control (ef)
High-1 (h1)
Expedited (ef)
High-2 (h2)
Low-1 (l1)
Assured (af)
Low-2 (l2)
Best-Effort (be)
Flows
7210 SAS-E OS Quality of Service Guide
Item
Queue 1-8 1 (one) queue defined for each traffic class
Queue 8 • CIR=0
• PIR=max (line rate)
• CBS=default (values derived for optimal buffer usage)
Queue7 • CIR=0
• PIR=max (line rate)
• CBS=default (values derived for optimal buffer usage)
Queue 6 • CIR = 0
• PIR = max (line rate)
• CBS = default (values derived for optimal buffer usage)
Queue 5 • CIR = 0
• PIR = max (line rate)
• CBS = default (values derived for optimal buffer usage)
Queue 4 • CIR = 0
• PIR = max (line rate)
• CBS = default (values derived for optimal buffer usage)
Queue 3 • CIR = 0
• PIR = max (line rate)
• CBS = default (values derived for optimal buffer usage)
Queue 2 • CIR = 0
• PIR = max (line rate)
• CBS = default (values derived for optimal buffer usage)
Queue 1 • CIR = 0
• PIR = max (line rate)
• CBS = default (values derived for optimal buffer usage)
Default All FCs are mapped to corresponding Queues and Dot1p values are
Action marked as follows:
Definition
QoS Policies
Page 41