Copying And Overwriting Network Policies; Editing Qos Policies - Alcatel-Lucent 7210 SAS E OS Quality Of Service Manual

Service Management Tasks

Copying and Overwriting Network Policies

You can copy an existing network policy to a new policy ID value or overwrite an existing policy
ID. The
exists.
CLI Syntax: config>qos# copy network source-policy-id dest-policy-id
[overwrite]
The following output displays the copied policies:
A:ALA-12>config>qos# info detail
---------------------------------------------
...
...
...
...
---------------------------------------------
A:ALA-12>config>qos#

Editing QoS Policies

You can change existing policies, except the default policies, and entries in the CLI. The changes
are applied immediately to all access uplink ports where the policy is applied. To prevent
configuration errors use the copy command to make a duplicate of the original policy to a work
area, make the edits, and then overwrite the original policy.
Page 70
option must be specified or an error occurs if the destination policy ID
overwrite
network 1 create
description "Default network QoS policy."
scope template
ingress
default-action fc be profile out
network 600 create
description "Default network QoS policy."
scope template
ingress
default-action fc be profile out
network 700 create
description "Default network QoS policy."
scope template
ingress
default-action fc be profile out
7210 SAS-E OS Quality of Service Guide