Removing the graphics card
WARNING: Before working inside your computer, read the safety information that shipped with your computer and
follow the steps in
in
After working inside your
www.dell.com/regulatory_compliance.
Prerequisites
1
Remove the
base
cover.
2
Remove the battery.
3
Remove the
wireless
4
Remove the
solid-state drive
5
Remove the
rear-I/O
6
Remove the
computer
7
Remove the
heat-sink
Procedure
1
Disconnect the graphics-card power cable from the system board.
2
Disconnect the graphics-card power cable from the graphics card.
3
Remove the two screws (M2x3) that secure the two graphics-card cable to the graphics card.
4
Remove the three screws (M2x3) that secure the graphics card to the system board.
72
Before working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
card.
(in SSD1 slot).
cover.
base.
assembly.
computer. After working inside your computer, follow the instructions