GE PVM9179*K Series Training Bulletin page 7

Exhaust fan motor – Remove three screws from
rear of cover. Remove two screws securing vent
cut-out, bend cut-out up to remove motor.
Wave guide cover (Mica) – Remove three screws
securing cover from inside the oven cavity.
LED cooktop lights – Remove the bottom and the
screw securing the glass lens and slide LED
assembly to the left to disengage tabs on left side,
slide the assembly to the right to disengage right
side tabs.
Cavity Lamp – Remove the grill and screw securing
the cover.
Cavity TCO – Remove the grill and outer case. Two
screws secure the TCO to the cavity bracket.
7