Printing At A Shop - Sony Cyber-shot DSC-W380 Handbook

4 MENU t (Print) t desired mode t z on the control button
This Image
Multiple Images
5 Desired item t [Start] t z
Quantity
Layout
Size
Date
Notes
• Movies cannot be printed.
• If the camera could not be connected to the printer, be sure to set [USB Connect] under
Settings) to [PictBridge].
• Do not disconnect the cable for multi-use terminal while the
appears on the screen.

Printing at a shop

You can take a memory card containing images shot with the camera to a photo printing service
shop. As long as the shop supports photo printing services conforming to DPOF, you can make a
(Print order) mark on images in advance in the playback mode so that you do not have to
reselect them when you print them out at the shop.
Notes
• You cannot print images stored in the internal memory at a print shop directly from the camera. Copy the
images to a memory card (page 101), then take the memory card to the print shop.
• Consult your photo printing service shop as to what types of memory card they handle.
• A memory card adaptor (sold separately) may be necessary. Consult your photo printing service shop.
• Before you take image data to a shop, always copy (back up) your data to a disk.
• You cannot set the number of prints.
• If you want to superimpose dates on images, consult your photo printing service shop.
Prints the currently displayed image in single-image mode.
You can select and print multiple images.
After step 4, perform the following.
1Select an image then press z.
Repeat the above steps until there are no more images to be
printed.
2MENU t [OK] t z
Selects the number of copies of the specified image to be printed.
• The designated number of images may not all fit onto a single sheet
depending on the quantity of images.
Selects the number of images you want to print side by side on a
sheet.
Selects the size of the printing sheet.
Selects [Date] or [Day&Time] to insert the date and time on
images.
• When you choose [Date], the date will be inserted in the order you have
selected using [Date & Time Setting] on the camera. This function may
not be available depending on the printer.
(Main
(PictBridge Connecting) indicator
116 GB