* Models w ith UV/AK/DI: RO water flows out of point G at FT15 and flows into the input
(left) side of the next stage.
final stage.
7.6 Connect the other end of the
Compression Fitting ) .
7.7 You may
n eatly organize the tubings, but make sure to leave enough length so the filter system
can be moved freely in and out of the cabinet when replacing filters.
7.8 You can mount the system using two 10 x 11/4 Phillips Flat Wood Screws.
This will make replacing filter cartridges easier.
Page 14
S o the
B LUE
B LUE
tubing to the RO faucet (refer to H ow to Use the
w ww.123filter.com
| (678) 2617611 |
tubing should be connected to the output side of the
S
upport@123Filter.com