Remote Commander - Sony CCD-TRV95 Operating Instructions (primary manual) Operating Instructions Manual

Identifying the parts

Remote Commander

The buttons that have the same name on the Remote Commander as on the camcorder
function identically.
RMT-717
1
2
3
4
5
6
7
1 Transmitter
Point toward the remote sensor to
control the camcorder after turning on
the camcorder.
2 ZERO MEM button (p. 62, 71)
3 DATA CODE button (p. 25)
4 COUNTER RESET button (p. 14)
5 TIME CODE WRITE button (p. 76)
6 INDEX buttons
MARK button (p. 72)
ERASE button (p. 75)
Notes on the Remote Commander
•Keep the remote sensor away from strong light sources such as direct sunlight or
illumination. Otherwise, the remote control may not be effective.
•Be sure that there is no obstacle between the remote sensor on the camcorder and the
Remote Commander.
•This camcorder works in commander mode VTR 2. The commander modes (1, 2 and
3) are used to distinguish this camcorder from other Sony VCRs to avoid remote
control misoperation. If you use another Sony VCR in commander mode VTR 2, we
recommend you change the commander mode or cover the remote sensor of the VCR
with black paper.
1
!º
!¡
8
9
!º
!¡
7 SEARCH buttons
DATE button (p. 69)
INDEX button (p. 73)
8 START/STOP button (p. 12)
9 Power zoom button (p. 15)
0 Video control buttons (p. 22)
!¡ DISPLAY button (p. 23)
RMT-708
8
9
103