Playing Back A Tape - Sony Handycam Vision CCD-TRV82 Operating Instructions Manual

Playing back a tape

You can monitor the playback picture on the LCD screen.
(1) While pressing the small green button on the POWER switch, set it to VTR.
The video control buttons light up.
(2) Insert the recorded tape with the window facing out.
(3) While pressing OPEN, open the LCD panel. Adjust the angle of the LCD panel
or the brightness of the LCD screen if necessary.
(4) Press · to start playback.
(5) Adjust the volume using VOLUME.
You can also monitor the picture on a TV screen, after connecting the camcorder to a TV
or VCR.
1
POWER
CAMERA
OFF
VTR
3
To stop playback, press π.
To rewind the tape, press 0.
To fast-forward the tape rapidly, press ).
When monitoring on the LCD screen
You can turn the LCD panel over and move back to the camcorder with the LCD screen
facing out [a]. You can adjust the angle of the LCD screen by turning the LCD screen
up to 15 degrees [b].
[a]
22
2
4
STOP REW PLAY FF PAUSE REC
5
[b]
15°