TH-58PF12UK
9.12. Removal of Speaker Terminal
Block (L, R)
1. Remove 2 screws and then remove the Speaker Terminal
Block (H3-Board) (L, R).
2. Turn over the Speaker Terminal Block (L, R) and then dis-
connect the connector (H37).
9.13. Removal of Fan
1. Disconnect the Fan Relay Connectors.
2. Remove 8 screws and then remove the Fan Blocks(1,2).
3. Remove 4 screws and then remove the Fan (A).
4. Remove
20
screws
(B,C,D,E,F).
5. Reassemble the Fans in reverse order.
6. Stick the Fan Sponges around the Fan.
Note:
The Fan Sponge is not re-usable.
Please use a new one when Fan exchange.
24
and
then
remove
the
Fan