TH-58PF12UK
30. Pull the bottom of the Plasma Display Panel forward
(arrow1).
31. Slide the Plasma Display Panel and then remove the
Plasma Display Panel (arrow2).
32. Remove 8 screws and then remove the Reinforcement
Angles (L,R).
Note: when exchange the Stand Block Assy
• Remove 8 screws and then remove the Stand Block
Assy (L, R).
33. Remove the Rear Cover Hook Left and Rear Cover Hook
Right from the Plasma Display Panel.
34. Remove 10 Rear Cover Spacers and Rear Cover Spacer
Rings from the Plasma Display Panel.
Caution:
• Please confirm the installation place of Rear Cover Hook
Left, Rear Cover Hook Right, Rear Cover Spacers and
Rear Cover Spacer Rings when you exchange the
Plasma Display Panel, and install them in an original
installation place after exchanging the Plasma Display
Panel.
35. Remove the Plasma Display Panel.
32