Removal Of Speaker; Removal Of A-Board; Removal Of Fan - Panasonic TH-50PB2E Service Manual

Interactive plasma display

Hide thumbs Also See for TH-50PB2E:

Table of Contents

TH-50PB2E

5. Remove 2 Hexagonal-Head screws and 2 screws and

then remove HX-Board.

8.5.

Removal of Speaker

1. Disconnect the Speaker lead.

• Push the speaker terminal hook and pull out the speaker

lead (+).

2. Remove 5 screws ( ) and then remove the Speaker

Block (L, R).

3. Remove 2 screws (B) from each Speaker Block and then

remove the Speaker.

8.6.

The important matter after A-Board exchange

• Since a touch pen setup is come by [OFF] when A-Board is

exchanged, please set to [ON].

1. Remove the HX-Board Block.

(Refer to Removal of HX-Board)

2. Remove the Speaker Block (L).

(Refer to Removal of Speaker)

3. Disconnect the connectors (A5, A11, A13, A16, A17, A22,

A27), and remove the flexible cables from the connectors

(A1, A20, A31, A32, A33).

4. Remove the screws and then remove A-Board.

8.7.

1. Disconnect the Joint Connectors.

2. Remove the screws and then remove the Fan Block (A,

B).

3. Remove the screws and then remove the Fan (1, 2, 3, 4)

from the Fan Fixed Metal.

Table of Contents