Advertisement
3M
Personal Safety Division
™
Fit check
1. Cover the front of the respirator with both hands
being careful not to disturb the fit of the respirator.
2a. UNVALVED respirator – EXHALE sharply.
2b. VALVED respirator – INHALE sharply.
3. If air leaks around the nose, re-adjust the noseclip
to eliminate leakage. Repeat the above fit check.
4. If air leaks at the respirator edges, work the straps
back along the sides of the head to eliminate leakage.
Repeat the above fit check.
If you CANNOT achieve a proper fit DO NOT enter
the hazardous area. See your supervisor.
Users should be fit tested in accordance
with national requirements.
For information regarding fit testing procedures,
please contact 3M.
Disposal
Contaminated products should be disposed as hazardous
waste in accordance with national regulations.
Important notice
The use of the 3M product described within this document assumes that the user has previous experience of this type of product
and that it will be used by a competent professional. Before any use of this product it is recommended to complete some trials
to validate≈the performance of the product within its expected application.
All information and specification details contained within this document are inherent to this specific 3M product and would not be
applied to other products or environment. Any action or usage of this product made in violation of this document is at the risk of the user.
Compliance to the information and specification relative to the 3M product contained within this document does not exempt the user
from compliance with additional guidelines (safety rules, procedures).
Compliance to operational requirements especially in respect to the environment and usage of tools with this product must be observed.
The 3M group (which cannot verify or control those elements) would not be held responsible for the consequences of any violation of these
rules which remain external to its decision and control.
Warranty conditions for 3M products are determined with the sales contract documents and with the mandatory and applicable clause,
excluding any other warranty or compensation.
For more information please visit www.3M.co.uk/AuraGen3
Personal Safety Division
3M United Kingdom PLC
3M Centre
Cain Road, Bracknell
Berkshire RG12 8HT
Tel: 0870 60 800 60
www.3M.co.uk/safety
3M
Aura
™
|
3M Ireland Limited
The Iveagh Building
The Park, Carrickmines
Dublin 18
Tel: 1 800 320 500
Particulate Respirators 9300+Gen3 Series
™
Marking
NR =
Non reusable
D =
Meets the clogging requirements
End of Shelf Life. Date format: YYYY/MM/DD
Temperature Range
Maximum Relative Humidity
Name and address of Legal Manufacturer
Dispose of in accordance with local regulations
Approvals
These products are CE Marked to the requirements
of Community Directive 89/686/EEC or European Regulation
(EU) 2016/425. The applicable legislation can be determined
by reviewing the Certificate and Declaration of Conformity
at http://www.3M.com/Respiratory/certs
These products are type approved and audited annually
by BSI, Kitemark Court, Davy Avenue, Knowlhill, Milton
Keynes MK5 8PP, UK, Notified Body No. 0086.
Made in UK, in an ISO 9001:2008, ISO 14001:2004
and OHSAS 18001:2007 certified plant.
Please recycle. Printed in the UK. © 3M 2018.
3M, Aura, Cool Flow and Safe Guard are trademarks
of the 3M company. All rights reserved. J441621
Advertisement
