Advertisement
Quick Links
3M 9502+N95
Particulate Respirator N95
Standard Size / Headband
User Instructions
IMPORTANT: Keep these User Instructions for reference
This respirator has dual approval as a United States (US) National Institute for Occupational Safety and
Health (NIOSH) N95 particulate respirator and as a China GB2626-2019 KN95 particulate respirator.
Specific information is provided where applicable.
UI-98-060-0332-5_2
GB2626-2019 KN95
Advertisement
Related Manuals for 3M 9502
Summary of Contents for 3M 9502
- Page 1 3M 9502+N95 Particulate Respirator N95 Standard Size / Headband User Instructions IMPORTANT: Keep these User Instructions for reference This respirator has dual approval as a United States (US) National Institute for Occupational Safety and Health (NIOSH) N95 particulate respirator and as a China GB2626-2019 KN95 particulate respirator.
- Page 2 Follow all applicable local regulations. For additional information on 3M use recommendations for this class of respirator please consult the 3M Respirator Selection Guide found on the Personal Safety web site at www.3M.com/respiratorselector or call 1-800-243-4630 in U.S.A. In Canada, call 1-800 or call 86-21-22105335.
-
Page 3: Biological Particles
Biological Particles This respirator can help reduce inhalation exposures to certain airborne biological particles (e.g. Bacillus anthracis, Mycobacterium tuberculosis mold, , etc.) but cannot eliminate the risk of contracting infection, illness or disease. OSHA and other government agencies have not established safe exposure limits for these contaminants. - Page 4 health, are unknown or when concentrations exceed 10 times the permissible exposure limit (PEL) or according to specific OSHA standards or applicable government regulations, whichever is lower.* *For Use in China: Do not use for oil based particles. Do not use for particles in concentrations that exceed the maximum allowable concentration required by the applicable regulation and standard.
-
Page 5: Time Use Limitation
Time Use Limitation If respirator becomes damaged, soiled, or breathing becomes difficult, leave the contaminated area immediately and replace the respirator. Fitting Instructions Must be followed each time respirator is worn. Place the respirator against your face with the nosepiece across the bridge of your nose. Hold the respirator on your face and position the respirator under the chin. - Page 6 Fax: 021-2210 5035 In United States, contact: Website: www.3m.com/workersafety Technical Assistance: 1-800-243-4630 For other 3M products: 1-800-3M-HELPS or 1-651-737-6501 Made in China © 3M 2020. All rights reserved. 3M is a trademark of 3M Company. 3M PSD products are occupational use only.