Shield Connection Terminal Blocks [De] - Siemens FS20 Mounting & Installation

5.9 Shield connection terminal blocks [DE]

Building Technologies
Fire Safety
Figure 53: Mounting of the shield connection terminal blocks
1 Shield connection terminal block
2 Terminal strip
3 Philips screws M 3/6
Mounting steps
1. Fasten the terminal strip (2) using the two screws (3) as follows:
2. Eco and Standard housings: Above the rectangular cable breakout opening on
the right
3. Comfort housing: One terminal strip above each of the rectangular cable
breakout openings
4. Hang the shield connection terminal blocks (1) onto the terminal strip (2) and
fasten them by tightening the knurled screws.
Mounting and installation of the compact control panels
Shield connection terminal blocks [DE]
1
2
008851_s_en_--
5
115 | 354
2016-01-27