Radiation Safety Information - Pace XR 3700 Manual

 The radiation exposure dosage received by personnel working with
x-ray inspection equipment should not exceed those limits set by
local regulations relating to ionizing radiation.
 Adequate warning signs and symbols should be displayed in the
vicinity of the XR 3500/3700 warning of possible x-ray exposure.
Any warning lamps and signals should be checked prior to
operating the XR 3500/3700.
 The electrical circuits of the XR 3500/3700, although enclosed for
operator protection, must be considered as a potential hazard.
Strict observance of safety practices pertaining to operation and
maintenance is essential. Proper electrical grounding must always
be used.
 Before operating the XR 3500/3700, all personnel designated or
authorized to operate the unit, as well as those supervising its
operation, should have a full understanding of how it works.
Additionally, they should be familiar with established radiation
safety exposure practices sanctioned by the National Bureau of
Standards Handbook, "X-ray Protection" HB93, pertaining to x-ray
protection.
 Service personnel should read this manual and be familiar with its
contents before attempting to adjust or repair this equipment.
2.

Radiation Safety Information

Federal, State and Local Radiation Regulations (US ONLY)
This cabinet x-ray system was designed to conform to U.S. and Food
and Drug Administration (FDA) requirements as stated in the Code of
Federal Regulations, Title 21 (21CFR). These requirements (often
referred to as the CDRH or BRH regulations) govern the design and
manufacture of all equipment that produces ionizing radiation. Such
equipment includes television sets and microwave ovens, as well as
cabinet x-ray systems. In fact, the maximum allowable radiation
emission for cabinet x-ray systems is the same as that set for
television sets and microwave ovens.
4