Xr 3700 Safety Information - Pace XR 3700 Manual

1. XR 3500/3700 Safety Information
It is essential that the operator of the XR 3500/3700 read and understand
the following safety warnings PRIOR to operation.
The XR 3500/3700 is designed to provide safe and efficient operation.
However, any equipment producing ionizing radiation (X-rays) must be
considered hazardous and should be treated accordingly. When
operating this equipment, observe the following:
 PACE strongly recommends that all maintenance be performed by
a qualified service technician.
 The XR 3700 x-ray tube produces high voltages of up to 70,000
volts. The XR 3500 X-ray tube produces high voltages of up to
50,000 volts. Under no circumstances should the case be
disassembled or modified as severe electrical shock may occur.
 The XR 3500/3700 is designed to ensure adequate radiation
shielding. Even so, always be aware that the ionizing radiation (x-
rays) can constitute a distinct hazard if not employed in strict
accordance with instructions provided in this manual for maximum
operator safety.
 Exposure to excessive quantities of radiation can be dangerous to
your health. Avoid not only direct radiation exposure, but also to
secondary or scattered radiation which occurs when an x-ray beam
strikes or has passed through any material.
 Do not insert any part of the body into the inspection chamber while
x-rays are on. Although the XR 3500/3700 operates at a low x-ray
dose, unnecessary radiation exposure should be avoided. If an
item becomes jammed or lodged in the inspection area, the XR
3500/3700 should be turned off before any attempt is made to clear
the inspection chamber.
 PACE strongly recommends that all personnel operating the XR
3500/3700 wear a radiation film dosimeter badge. This badge
records an exposure history for the operator and acts as a constant
reminder to the operator to use caution and safe work practices
when operating the XR 3500/3700.
IMPORTANT: READ THIS FIRST
3