Modem Linc Central Eprom Replacement; Figure 14: Ez Zone Modem Linc Central Eprom Location - York EZ Zone Upgrade Manual

EZ Zone/Meridian

Modem Linc Central EPROM Replacement

EPROM Location
See Figure 17 For
Removal And
Installation Instructions

Figure 14: EZ Zone Modem Linc Central EPROM Location

26
Notch
036-21423-001 Rev. A (0602)
The EZ Zone Modem Linc Cen-
tral EPROM chip must be re-
placed with the Meridian
CommLink upgrade EPROM
chip, part #2ZZC004708224.
This EPROM chip is factory
programmed with the new Me-
ridian to EZ Zone software. This
chip must be replaced or the
Modem Linc Central will not
function with the Meridian sys-
tem.
CAUTION:
Power must be removed from the
Modem Linc Central during re-
moval of the old EPROM chip
and installation of the new
EPROM chip. It is also impera-
tive that the old EPROM chip is
removed gently to avoid damage
to the circuit board. Installation
of the new EPROM chip must
also be done with care to prevent
damage to the pins on the new
chip. See Figure 17 for detailed
chip removal and installation in-
formation.
Upgrade