Irc-6 Infrared Remote Control; Irc-6 Operation - Chauvet DJ SlimPAR PRO H USB User Manual

IRC-6 Infrared Remote Control

The SlimPAR PRO H USB is compatible with the IRC-6 infrared remote control from Chauvet. To set the
SlimPAR PRO H USB to IR mode, follow the instructions below:
1. Press <MENU> repeatedly until SEr shows on the display.
2. Press <ENTER>.
3. Press <UP> or <DOWN> to select On or OFF.
4. Press <ENTER>.

IRC-6 Operation

Automatic Mode
Automatic mode will enable you to run the automatic programs on the product.
To turn on Automatic mode:
BLACK
AUTO SOUND
OUT
SENSI-
STROBE SPEED
TIVITY
To select a fading program:
%
MANUAL FADE
R G B
To adjust the speed of the automatic program:
A UV W
Sound-Active Mode
+ -
0
Sound-Active mode will enable the product to respond to the music.
1 2 3
To turn on Sound-Active mode:
4 5 6
7 8 9
To adjust the sound sensitivity in Sound-Active mode:
Manual Color Control
To choose a specific color with the IRC-6:
To manually control the RGB percentage:
Miscellaneous Operation
To adjust the total output level:
To activate or deactivate strobing:
To black out the lights:
This will turn off all the lights until the button is pressed again.
NOTE: The IRC-6 will not respond to any inputs when Black Out is activated. If the
remote does not respond when a button is pressed, try pressing <BLACK OUT>.
You may have inadvertently activated Black Out.
Page 10 of 15
1. Press <AUTO> on the IRC-6.
2. Press <+> or <–> to choose between the different auto programs.
1. Press <FADE> on the IRC-6.
2. Press <+> or <–> to select P2 or P4.
1. Press <SPEED> on the IRC-6.
2. Press <+> or <–> to increase or decrease the speed of the program.
1. Press <SOUND> on the IRC-6.
2. Press <+> or <–> to select Snd1 or Snd2.
1. Press <SENSITIVITY> on the IRC-6.
2. Press <+> or <–> to increase or decrease the sound sensitivity.
1. Press <MANUAL> on the IRC-6.
2. Press any number between <0>~<9> to choose a preset color.
1. Press <R> (red), <G> (green), <B> (blue), <A> (amber), <UV>/<P>
(ultraviolet), or <W> (white) to choose the color.
2. Press <+> or <–> to increase or decrease the value of each color.
1. Press <%> on the IRC-6.
2. Press <+> or <–> to increase or decrease the sound sensitivity.
1. Press <STROBE> on the IRC-6.
2. Press <+> or <–> to increase or decrease the strobe rate.
3. Press <STROBE> again to turn off the strobe.
1. Press <BLACK OUT> on the IRC-6.
SlimPAR PRO H USB User Manual Rev. 5
Operation