ActionTec HPE200AV User Manual page 22

9. In the General tab, make sure the circle next to "Use the following
is selected. When active, a black dot appears in the circle. If the circle already
contains a black dot, leave it alone.
10. Enter the following address in the "
Enter the periods in the address by pressing the space bar on the keyboard.
11. Enter the following address in the "Subnet mask" text box:
Enter the periods in the address by pressing the space bar on the keyboard.
12. Click OK. The Internet Protocol (
13. In the Local Area Connection Properties window, click Close
Connection Properties window disappears.
14. Click Close in the Local Area Connection Status window. The window
disappears.
15. Close the rest of the open windows by clicking on the "x" button at the upper
right corner of the window.
The computer is now set up with a static
Chapter 5 Setting Up Static IP Address
192.168.1.2
255.255.255.0
TCP/IP
Address" text box:
IP
) Properties window disappears.
address.
IP
19
Address"
IP
The Local Area
.